Motorcycle ergonomics glossary
21 terms the simulator and guides use.
Terms
Bar risers
Blocks that lift the handlebar clamp. They raise only Bar height above hip. Handlebar risers guide
Baseline
A pinned setup to compare against. Try it in the Studio
Clip-ons
Handlebar halves clamped to the fork tubes, as in Sport. Sport riding position
Elbow angle
The inside angle between your upper arm and forearm. A straight arm is 180°. The tool does not compute wrist angle. Handlebar risers guide
Footpeg drop
The distance from your hip down to the footpeg, always positive. Footpeg position guide
Footpeg position
Where your feet rest, set by Footpeg forward of hip and Footpeg below hip. Footpeg position guide
Forward controls
Footpegs mounted ahead of the rider, as in Cruiser. Cruiser riding position
Handlebar rise and pullback
Rise is grip height above your hip. Pullback is how far the grips sit back toward you. Handlebar risers guide
Hip angle
The inside angle at the hip between your torso and thigh. A straight line is 180°. Footpeg position guide
Inseam
Your floor to crotch length, used only for the seat comparison. How to measure inseam
Inseam minus seat height
Inseam minus seat height, in millimeters. A positive gap does not mean both feet reach the ground flat. Seat height chart
Knee angle
The inside angle between your thigh and shin. A straight leg is 180°. Footpeg position guide
Lowering link
A part that lowers the seat by changing the rear suspension. The tool models it as a seat height change only. Seat height change guide
Measured from your hip
Grips and pegs are measured from your hip. The Seat down and Seat up what-ifs move the hip, so bars and pegs shift the other way. Measuring guide
Mid controls
Footpegs between standard and forward. The Touring example puts them 260 mm forward of the hip, between 180 mm for Standard and 500 mm for Cruiser. Touring riding position
Reach
The distance in a straight line, like shoulder to grip. The tool checks whether your limb can reach. How the model works
Rearsets
Footpegs mounted higher and further back than standard pegs. Footpeg position guide
Rider triangle
The shape made by your seat, handlebars and footpegs. How the model works
Seat height
The distance from the ground to the seat. The tool uses it only for inseam minus seat height, so it cannot say if your feet reach. Seat height chart
Torso lean
Your torso lean forward from vertical, in degrees. You enter it. Moving a control never changes it. How the model works
Unreachable
A result where the limb cannot span the distance. The tool says unreachable and never forces an angle. Methodology